Article Summary:
Ensuring quality in automated injection pen assembly requires more than just adding cameras. This article explains how DROFEN MACHINERY integrates Keyence vision sensors with intelligent I/O failure strategies (Pause, Stop, Back Check) to instantly identify and manage defective parts without halting the entire production line.
The Content
The assembly of an insulin injection pen involves multiple intricate steps: plunger rod insertion, spring placement, torque application, and cap sealing. A single missing component or misaligned part can compromise the entire device. To guarantee zero-defect production, advanced vision inspection must be deeply integrated with the machine's control logic.
DROFEN MACHINERY employs a multi-point vision inspection strategy, seamlessly linked to intelligent Input/Output (I/O) failure handling, in all our automatic insulin injection pen final assembly machines.
Multi-Point Vision Integration
Rather than relying on a single end-of-line inspection, our assembly lines utilize multiple high-speed vision sensors (such as Keyence systems) distributed across critical workstations. For example, Station 2 might verify the presence and orientation of internal springs, while Station 3 confirms the correct seating of the cartridge.
These cameras communicate directly with the Siemens S7-1500 PLC via Profinet, allowing the system to make split-second "Pass/Fail" determinations within the machine's electronic cam cycle.
Intelligent Failure Actions
When a sensor or camera detects an unexpected result (e.g., an input returns an OFF value when ON is expected), the system does not simply crash. DROFEN's software architecture defines specific, programmable failure actions for every I/O element:
1.Pause (Start/Stop): An unexpected result triggers a controlled pause of the specific cell, allowing an operator to intervene without losing the machine's synchronization.
2.Stop (Zero/Now): For critical safety or process failures, the system triggers either an immediate stop or a controlled stop at the zero-degree cam position.
3.Back Check: The software continuously monitors that a specific device's input changes from ON to OFF within a full cell cycle, ensuring sensors are not "stuck" in a false-positive state.
Part Tracking and Reject Management
Crucially, the system tracks the status of the specific part associated with the failed inspection. The software marks the part as "Bad" and tracks it through the remaining stations. Subsequent assembly steps are bypassed for this specific pallet, and the defective unit is automatically diverted to a reject bin at the end of the line.
This integration of vision and intelligent control allows DROFEN MACHINERY to deliver high-speed assembly solutions that maximize yield while ensuring uncompromising product quality.
Related Technical Resources
•Complete Solution: Insulin Pen Assembly Line Complete Solution (Pre-Assembly + Final Assembly Integration)
