Apr 23, 2026

Resilience In Automation: Validating Utility Interruption Recovery In Pen Assembly

Leave a message

Article Summary:

Power outages and loss of compressed air are realities in any manufacturing plant. This article explores how DROFEN MACHINERY simulates utility interruptions during the FAT to validate the safe shutdown and seamless recovery of high-speed injection pen assembly lines, protecting both the equipment and the product.
 
In the controlled environment of a pharmaceutical manufacturing facility, unexpected utility interruptions-such as a sudden drop in plant air pressure or a localized power failure-are rare but inevitable. When a high-speed injection pen assembly line operating at 160 units per minute suddenly loses power or air, the consequences can be severe: mechanical crashes, damaged components, and compromised batch data.
 
A truly robust machine must not only operate efficiently under perfect conditions but also fail safely and recover gracefully when conditions are compromised. At DROFEN MACHINERY, validating this resilience is a mandatory component of our Factory Acceptance Test (FAT) protocols.

 

Simulating the Unexpected

 

During the General Operational Tests (OT) phase of the FAT, we intentionally subject both the main EcoLine assembly line and the EcoPal loading system to severe utility interruptions.
 
1. PLC Power Interruption (Tests 1.00.00.01 & 1.41.00.01)
 

We simulate a sudden loss of control power to the PLCs. The validation criteria dictate that the system must safely halt without causing erratic servo movements. More importantly, we verify the data retention upon power restoration. The PLC's non-volatile memory must perfectly recall the state of the shift register-knowing exactly which pallets contain good parts, rejects, or are empty-ensuring that the batch can be resumed without compromising traceability or requiring a complete line clearance.

 

2. Plant Air Interruption (Tests 1.00.00.02 & 1.41.00.02)
 

Pneumatic systems control many critical actuators and grippers. We simulate a sudden drop in the factory compressed air supply. The machine must detect the pressure drop via its digital pressure switches and execute a controlled stop before the air pressure falls below the minimum threshold required to hold components securely. We verify that grippers do not drop delicate glass cartridges and that safety valves lock pneumatic cylinders in a safe position.

 

The E-Stop Recovery Protocol

 

Alongside utility failures, we rigorously test the Emergency Stop (E-Stop) circuits (Tests 1.00.00.03 & 1.41.00.03). Activating an E-Stop must instantly cut power to all hazardous motion devices (servos and pneumatics) via hardwired safety relays, independent of the PLC software.
The true test, however, is the recovery. After an E-Stop is reset, the machine must not restart automatically. It must require a deliberate operator acknowledgment, and the HMI must guide the operator through a safe homing sequence if the machine stopped mid-cycle.
 
By aggressively validating these utility interruption and recovery protocols during the FAT, DROFEN MACHINERY ensures that your turnkey assembly project is resilient, safe, and fully prepared for the realities of commercial GMP production, making your manufacturing floor great again.
 
 
 
 
 
Send Inquiry